A 200-GHz spacing, 17-channel, 1×2 wavelength selective switch using a silicon arrayed-waveguide grating with loopback

Hideaki Asakura, Takemasa Yoshida, Hiroyuki Tsuda, Keijiro Suzuki, Ken Tanizawa, Munehiro Toyama, Minoru Ohtsuka, Nobuyuki Yokoyama, Kazuyuki Matsumaro, Miyoshi Seki, Keiji Koshino, Kazuhiro Ikeda, Shu Namiki, Hitoshi Kawashima

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Abstract

A 200-GHz spacing, 17-channel, 1×2 wavelength selective switch was fabricated using silicon wire waveguides. An arrayed-waveguide grating with loopback is used to configure the 1×2 wavelength selective switch. The chip size was only 2.8 mm × 6.5 mm. The minimum and the maximum losses of the wavelength selective switch were 21 dB and 26 dB, respectively. The minimum and the maximum crosstalks were -21 dB and -2 dB, respectively.

Original languageEnglish
Title of host publication2015 International Conference on Photonics in Switching, PS 2015
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages52-54
Number of pages3
ISBN (Electronic)9781479988211
DOIs
Publication statusPublished - 2015 Nov 13
EventInternational Conference on Photonics in Switching, PS 2015 - Florence, Italy
Duration: 2015 Sept 222015 Sept 25

Publication series

Name2015 International Conference on Photonics in Switching, PS 2015

Other

OtherInternational Conference on Photonics in Switching, PS 2015
Country/TerritoryItaly
CityFlorence
Period15/9/2215/9/25

Keywords

  • AWG
  • WSS
  • arrayed-waveguide grating
  • loopback
  • silicon
  • silicon wire waveguide
  • wavelength selective switch

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'A 200-GHz spacing, 17-channel, 1×2 wavelength selective switch using a silicon arrayed-waveguide grating with loopback'. Together they form a unique fingerprint.

Cite this