Abstract
This paper describes a novel approach for a robust motion control based on image signal. The considered system has a 3-link planer redundant manipulator and a CCD camera mounted on its end-effector. In case the motion command of a manipulator is calculated from several feature points obtained by image signal, the kinematic transformation among coordinates is required. In the practical application, however, the image signal includes several kinds of errors caused by the unknown modeling error. In general, it is assumed that these errors are negligible amount. In the precise motion control based on the vision sensor, the above assumption is not always acceptable. To suppress the disturbance effect of the modeling error in the vision based motion system, the paper introduces the image space observer. The proposed controller has a simple structure and is applicable to the vision based system without increasing the calculation effort. The validity of the image space observer is confirmed by several numerical and experimental results in a 3-link planer manipulator system.
| Original language | English |
|---|---|
| Pages | 1109-1113 |
| Number of pages | 5 |
| Publication status | Published - 1998 Jan 1 |
| Event | Proceedings of the 1998 24th Annual Conference of the IEEE Industrial Electronics Society, IECON. Part 4 (of 4) - Aachen, Ger Duration: 1998 Aug 31 → 1998 Sept 4 |
Other
| Other | Proceedings of the 1998 24th Annual Conference of the IEEE Industrial Electronics Society, IECON. Part 4 (of 4) |
|---|---|
| City | Aachen, Ger |
| Period | 98/8/31 → 98/9/4 |
ASJC Scopus subject areas
- Control and Systems Engineering
- Electrical and Electronic Engineering