Cycle-to-cycle flow rate measurement on reciprocating engine using fast-response laminar flow meter

Yoshihiko Kanoto; Kenichiro Nagai; Tsunemichi Kawa; Norimasa Iida

doi:10.1299/kikaic.75.2972

Cycle-to-cycle flow rate measurement on reciprocating engine using fast-response laminar flow meter

Yoshihiko Kanoto, Kenichiro Nagai, Tsunemichi Kawa, Norimasa Iida

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

In recent years, higher combustion efficiency and lower emissions are required on engine development and therefore higher combustion control is necessary. To realize higher combustion control in reciprocating engine, cycle to cycle flow rate measurement is important. Especially it is a key factor to control HCCI combustion. Traditional laminar flow meter has a problem in responsibility. However, fast response differential pressure transducer allows cycle to cycle dynamical flow measurement. The availability of fast-response laminar flow meter on cycle-to-cycle flow rate measurement is shown in this paper.

Original language	English
Pages (from-to)	2972-2977
Number of pages	6
Journal	Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume	75
Issue number	759
DOIs	https://doi.org/10.1299/kikaic.75.2972
Publication status	Published - 2009 Nov
Externally published	Yes

Keywords

Dynamic characteristics
Measurement
Reciprocating engine

ASJC Scopus subject areas

Mechanics of Materials
Mechanical Engineering
Industrial and Manufacturing Engineering

Access to Document

10.1299/kikaic.75.2972

Cite this

Cycle-to-cycle flow rate measurement on reciprocating engine using fast-response laminar flow meter. / Kanoto, Yoshihiko; Nagai, Kenichiro; Kawa, Tsunemichi et al.
In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, Vol. 75, No. 759, 11.2009, p. 2972-2977.

Research output: Contribution to journal › Article › peer-review

@article{9504edd1750b4f1ebc90608a23c3a393,

title = "Cycle-to-cycle flow rate measurement on reciprocating engine using fast-response laminar flow meter",

abstract = "In recent years, higher combustion efficiency and lower emissions are required on engine development and therefore higher combustion control is necessary. To realize higher combustion control in reciprocating engine, cycle to cycle flow rate measurement is important. Especially it is a key factor to control HCCI combustion. Traditional laminar flow meter has a problem in responsibility. However, fast response differential pressure transducer allows cycle to cycle dynamical flow measurement. The availability of fast-response laminar flow meter on cycle-to-cycle flow rate measurement is shown in this paper.",

keywords = "Dynamic characteristics, Measurement, Reciprocating engine",

author = "Yoshihiko Kanoto and Kenichiro Nagai and Tsunemichi Kawa and Norimasa Iida",

year = "2009",

month = nov,

doi = "10.1299/kikaic.75.2972",

language = "English",

volume = "75",

pages = "2972--2977",

journal = "Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C",

issn = "0387-5024",

publisher = "Japan Society of Mechanical Engineers",

number = "759",

}

TY - JOUR

T1 - Cycle-to-cycle flow rate measurement on reciprocating engine using fast-response laminar flow meter

AU - Kanoto, Yoshihiko

AU - Nagai, Kenichiro

AU - Kawa, Tsunemichi

AU - Iida, Norimasa

PY - 2009/11

Y1 - 2009/11

N2 - In recent years, higher combustion efficiency and lower emissions are required on engine development and therefore higher combustion control is necessary. To realize higher combustion control in reciprocating engine, cycle to cycle flow rate measurement is important. Especially it is a key factor to control HCCI combustion. Traditional laminar flow meter has a problem in responsibility. However, fast response differential pressure transducer allows cycle to cycle dynamical flow measurement. The availability of fast-response laminar flow meter on cycle-to-cycle flow rate measurement is shown in this paper.

AB - In recent years, higher combustion efficiency and lower emissions are required on engine development and therefore higher combustion control is necessary. To realize higher combustion control in reciprocating engine, cycle to cycle flow rate measurement is important. Especially it is a key factor to control HCCI combustion. Traditional laminar flow meter has a problem in responsibility. However, fast response differential pressure transducer allows cycle to cycle dynamical flow measurement. The availability of fast-response laminar flow meter on cycle-to-cycle flow rate measurement is shown in this paper.

KW - Dynamic characteristics

KW - Measurement

KW - Reciprocating engine

UR - http://www.scopus.com/inward/record.url?scp=76349092089&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=76349092089&partnerID=8YFLogxK

U2 - 10.1299/kikaic.75.2972

DO - 10.1299/kikaic.75.2972

M3 - Article

AN - SCOPUS:76349092089

SN - 0387-5024

VL - 75

SP - 2972

EP - 2977

JO - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

JF - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

IS - 759

ER -

Cycle-to-cycle flow rate measurement on reciprocating engine using fast-response laminar flow meter

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this