Diamond-like carbon films synthesized under atmospheric pressure synthesized on PET substrates

Tetsuya Suzuki, Hideyuki Kodama

Research output: Contribution to journalArticlepeer-review

35 Citations (Scopus)


Diamond-like carbon films were synthesized under atmospheric pressure (AP-DLC) and their gas barrier properties and hardness were measured. The AP-DLC films were uniformly obtained by RF-plasma CVD method at room temperature with a size of 450 mm2. The growth rate increased as a function of C2H2 concentration and the average growth rate was around 12 μm/min. The maximum deposition rate was ~ 1 μm/s, which is approximately 2000 times larger than that by low-pressure plasma CVD of 1-2 μm/h. The gas barrier properties of AP-DLC films, ~ 1 μm thick, were 5-10 times larger than those of uncoated PET substrates. The microhardness of AP-DLC films was around 3 GPa, measured by the nano-indentation method. The issue lies in the removal of macro-particles of the films to improve the microhardness and the surface roughness. In this paper, we report the physical properties of DLC films synthesized under atmospheric pressure by the radio-frequency CVD method. We also summarize a brief history of PET bottle coating by vacuum-DLC films, as well as that of the development of atmospheric pressure technology and related DLC films, focused on gas barrier properties and micro-hardness.

Original languageEnglish
Pages (from-to)990-994
Number of pages5
JournalDiamond and Related Materials
Issue number5-8
Publication statusPublished - 2009 May


  • Atmospheric pressure
  • Diamond-like carbon
  • Gas barrier

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • General Chemistry
  • Mechanical Engineering
  • Materials Chemistry
  • Electrical and Electronic Engineering


Dive into the research topics of 'Diamond-like carbon films synthesized under atmospheric pressure synthesized on PET substrates'. Together they form a unique fingerprint.

Cite this