EEG-Hat with Candle-like Microneedle Electrode

Takumi Kawana; Yuri Yoshida; Yuta Kudo; Norihisa Miki

doi:10.1109/EMBC.2019.8857477

EEG-Hat with Candle-like Microneedle Electrode

Takumi Kawana
, Yuri Yoshida
, Yuta Kudo
, Norihisa Miki

Department of Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

5 Citations (Scopus)

Abstract

This paper reports the EEG-Hat, the hat-type EEG device with candle-like dry microneedle electrodes. Current wearable EEG devices have two major problems; 1) no adjustability to every participant and 2) no ability to measure EEG at hairy part. If these problems are solved, health care technologies in daily life will be developed drastically. The EEG-Hat potentially solves these problems. This device can adjust the electrodes to different size and shape of human head. This device has shutter-like structures to separate hair, so using this device, it is possible to measure EEG without separating hair by hand. First, we quantified the force to press the electrodes and the amount of separating hair. Then, the EEG-Hat fabricated based on the findings successfully measured EEG from 3 hairy parts without manual separation.

Original language	English
Title of host publication	2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1111-1114
Number of pages	4
ISBN (Electronic)	9781538613115
DOIs	https://doi.org/10.1109/EMBC.2019.8857477
Publication status	Published - 2019 Jul
Event	41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019 - Berlin, Germany Duration: 2019 Jul 23 → 2019 Jul 27

Publication series

Name	Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS
ISSN (Print)	1557-170X

Conference

Conference	41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019
Country/Territory	Germany
City	Berlin
Period	19/7/23 → 19/7/27

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 3 Good Health and Well-being

ASJC Scopus subject areas

Signal Processing
Biomedical Engineering
Computer Vision and Pattern Recognition
Health Informatics

Access to Document

10.1109/EMBC.2019.8857477

Cite this

Kawana, T., Yoshida, Y., Kudo, Y., & Miki, N. (2019). EEG-Hat with Candle-like Microneedle Electrode. In 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019 (pp. 1111-1114). Article 8857477 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/EMBC.2019.8857477

EEG-Hat with Candle-like Microneedle Electrode. / Kawana, Takumi; Yoshida, Yuri; Kudo, Yuta et al.
2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019. Institute of Electrical and Electronics Engineers Inc., 2019. p. 1111-1114 8857477 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Kawana, T, Yoshida, Y, Kudo, Y & Miki, N 2019, EEG-Hat with Candle-like Microneedle Electrode. in 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019., 8857477, Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, Institute of Electrical and Electronics Engineers Inc., pp. 1111-1114, 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019, Berlin, Germany, 19/7/23. https://doi.org/10.1109/EMBC.2019.8857477

Kawana T, Yoshida Y, Kudo Y, Miki N. EEG-Hat with Candle-like Microneedle Electrode. In 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019. Institute of Electrical and Electronics Engineers Inc. 2019. p. 1111-1114. 8857477. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS). doi: 10.1109/EMBC.2019.8857477

Kawana, Takumi ; Yoshida, Yuri ; Kudo, Yuta et al. / EEG-Hat with Candle-like Microneedle Electrode. 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 1111-1114 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

@inproceedings{275c8355295849b5a84fbbe3c0c93ca7,

title = "EEG-Hat with Candle-like Microneedle Electrode",

abstract = "This paper reports the EEG-Hat, the hat-type EEG device with candle-like dry microneedle electrodes. Current wearable EEG devices have two major problems; 1) no adjustability to every participant and 2) no ability to measure EEG at hairy part. If these problems are solved, health care technologies in daily life will be developed drastically. The EEG-Hat potentially solves these problems. This device can adjust the electrodes to different size and shape of human head. This device has shutter-like structures to separate hair, so using this device, it is possible to measure EEG without separating hair by hand. First, we quantified the force to press the electrodes and the amount of separating hair. Then, the EEG-Hat fabricated based on the findings successfully measured EEG from 3 hairy parts without manual separation.",

author = "Takumi Kawana and Yuri Yoshida and Yuta Kudo and Norihisa Miki",

note = "Funding Information: This work was supported by JST PRESTO (Information Environment and Humans), JSPS KAKENHI Grant-in-Aid for Scientific Research (C)17K02347. Publisher Copyright: {\textcopyright} 2019 IEEE.; 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019 ; Conference date: 23-07-2019 Through 27-07-2019",

year = "2019",

month = jul,

doi = "10.1109/EMBC.2019.8857477",

language = "English",

series = "Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1111--1114",

booktitle = "2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019",

}

TY - GEN

T1 - EEG-Hat with Candle-like Microneedle Electrode

AU - Kawana, Takumi

AU - Yoshida, Yuri

AU - Kudo, Yuta

AU - Miki, Norihisa

PY - 2019/7

Y1 - 2019/7

N2 - This paper reports the EEG-Hat, the hat-type EEG device with candle-like dry microneedle electrodes. Current wearable EEG devices have two major problems; 1) no adjustability to every participant and 2) no ability to measure EEG at hairy part. If these problems are solved, health care technologies in daily life will be developed drastically. The EEG-Hat potentially solves these problems. This device can adjust the electrodes to different size and shape of human head. This device has shutter-like structures to separate hair, so using this device, it is possible to measure EEG without separating hair by hand. First, we quantified the force to press the electrodes and the amount of separating hair. Then, the EEG-Hat fabricated based on the findings successfully measured EEG from 3 hairy parts without manual separation.

AB - This paper reports the EEG-Hat, the hat-type EEG device with candle-like dry microneedle electrodes. Current wearable EEG devices have two major problems; 1) no adjustability to every participant and 2) no ability to measure EEG at hairy part. If these problems are solved, health care technologies in daily life will be developed drastically. The EEG-Hat potentially solves these problems. This device can adjust the electrodes to different size and shape of human head. This device has shutter-like structures to separate hair, so using this device, it is possible to measure EEG without separating hair by hand. First, we quantified the force to press the electrodes and the amount of separating hair. Then, the EEG-Hat fabricated based on the findings successfully measured EEG from 3 hairy parts without manual separation.

UR - https://www.scopus.com/pages/publications/85077892870

UR - https://www.scopus.com/pages/publications/85077892870#tab=citedBy

U2 - 10.1109/EMBC.2019.8857477

DO - 10.1109/EMBC.2019.8857477

M3 - Conference contribution

C2 - 31946088

AN - SCOPUS:85077892870

T3 - Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS

SP - 1111

EP - 1114

BT - 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019

Y2 - 23 July 2019 through 27 July 2019

ER -

EEG-Hat with Candle-like Microneedle Electrode

Abstract

Publication series

Conference

UN SDGs

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this