TY - JOUR
T1 - Temporal velocity distribution of positive and negative ions incident on a wafer in a pulsed two-frequency capacitively coupled plasma in CF 4/Ar for SiO2 etching
AU - Yagisawa, Takashi
AU - Makabe, Toshiaki
N1 - Funding Information:
Manuscript received November 1, 2002; revised February 28, 2003. This work is supported in part by the Ministry of Education, Culture, Sport, Science, and Technology in Japan under a Grant in Aid for the 21st century Center of Excellence for Optical and Electronic Device Technology for Access Network. The authors are with the School of Integrated Design Engineering, Keio University, Yokohama 223-8522, Japan (e-mail: makabe@mkbe.elec.keio.ac.jp). Digital Object Identifier 10.1109/TPS.2003.815491
PY - 2003/8
Y1 - 2003/8
N2 - Two-frequency capacitively coupled plasmas (2f-CCP) are widely used for SiO2 etching. As the size of the element of the ultralarge scale integrated circuit (ULSI) decreases, a number of problems during plasma etching have been reported. In particular, charging damage caused by the difference of the velocity distribution between electrons and positive ions incident on an etched wafer will become an increasingly important issue. A pulse-modulated plasma with continuous-wave (CW) biasing at low frequency will become one of the practical solutions to the reduction of charging damage. In this paper, we numerically investigate the properties of the energy and angular distributions of positive and negative ions incident on a SiO2 wafer in a pulsed 2f-CCP system, which consists both of a very-high frequency (100 MHz) source for sustaining high density plasma and a low-frequency (1 MHz) bias for high-energy positive ions striking the wafer. The temporal behavior of the impact velocity distribution, which contributes to the reduction of the charges accumulated inside the hole/trench to be etched, are discussed for positive and negative ions.
AB - Two-frequency capacitively coupled plasmas (2f-CCP) are widely used for SiO2 etching. As the size of the element of the ultralarge scale integrated circuit (ULSI) decreases, a number of problems during plasma etching have been reported. In particular, charging damage caused by the difference of the velocity distribution between electrons and positive ions incident on an etched wafer will become an increasingly important issue. A pulse-modulated plasma with continuous-wave (CW) biasing at low frequency will become one of the practical solutions to the reduction of charging damage. In this paper, we numerically investigate the properties of the energy and angular distributions of positive and negative ions incident on a SiO2 wafer in a pulsed 2f-CCP system, which consists both of a very-high frequency (100 MHz) source for sustaining high density plasma and a low-frequency (1 MHz) bias for high-energy positive ions striking the wafer. The temporal behavior of the impact velocity distribution, which contributes to the reduction of the charges accumulated inside the hole/trench to be etched, are discussed for positive and negative ions.
KW - CF/Ar
KW - Ion velocity distribution (IVD)
KW - Pulsed two-frequency capacitively coupled plasmas (2f-CCP)
KW - SiO etching
KW - Very-high frequency (VHF) (100 MHz)/LF(1 MHz) plasma
KW - VicAddress
UR - http://www.scopus.com/inward/record.url?scp=0042929630&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0042929630&partnerID=8YFLogxK
U2 - 10.1109/TPS.2003.815491
DO - 10.1109/TPS.2003.815491
M3 - Article
AN - SCOPUS:0042929630
SN - 0093-3813
VL - 31
SP - 521
EP - 527
JO - IEEE Transactions on Plasma Science
JF - IEEE Transactions on Plasma Science
IS - 4 II
ER -