Skip to main navigation Skip to search Skip to main content

Thermal Transport Properties of a Mixed Anion Layered Compound, Polycrystalline LaCu1-δS0.5Se0.5O (δ = 0.01)

  • Nobuhiko Azuma
  • , Hiroki Sawada
  • , Hirotaka Ito
  • , Ryosuke Sakagami
  • , Yuya Tanaka
  • , Tatsuhide Fujioka
  • , Masanori Matoba
  • , Yoichi Kamihara

Research output: Contribution to journalArticlepeer-review

Abstract

Electrical and thermal transport properties of a polycrystalline carrier-doped wide-gap semiconductor LaCu1-δ S0.5Se0.5O (δ = 0.01), in which the CuCh (Ch = S, Se) layer works as conducting layer, were measured at temperatures 473~673 K. The presence of δ = 0.01 copper defects dramatically reduces the electrical resistivity (ρ) to approximately one part per million compared to that of δ = 0 at room temperature. The polycrystalline δ = 0.01 sample exhibited ρ of 1.3 × 10-3 Ωm, thermal conductivity of 6.0 Wm-1 K-1, and Seebeck coefficient (S) of 87 µVK-1 at 673 K. The maximum value of the dimensionless figure of merit (ZT) of the δ = 0.01 sample was calculated to be 6.4 × 10-4 at T = 673 K. The ZT value is far smaller than a ZT ~ 0.01 measured for a nominal LaCuSeO sample. The smaller ZT is mainly due to the small S measured for LaCu1-δS0.5Se0.5O (δ = 0.01). According to the Debye model, above 300 K phonon thermal conductivity in a pure lattice is inversely proportional to T, while thermal conductivity of the δ = 0.01 sample increases with increasing T.

Original languageEnglish
Pages (from-to)464-474
Number of pages11
JournalKorean Journal of Materials Research
Volume34
Issue number10
DOIs
Publication statusPublished - 2024

Keywords

  • Cu defect
  • OSSeO.
  • mixed anion layered compounds
  • thermoelectric material

ASJC Scopus subject areas

  • General Materials Science

Fingerprint

Dive into the research topics of 'Thermal Transport Properties of a Mixed Anion Layered Compound, Polycrystalline LaCu1-δS0.5Se0.5O (δ = 0.01)'. Together they form a unique fingerprint.

Cite this