Xenon excited state density measurements in electron beam pumped XeCl laser mixtures

F. Kannari, W. D. Kimura, J. F. Seamans, Dean R. Guyer

Research output: Contribution to journalArticlepeer-review

7 Citations (Scopus)


Time-dependent density measurements of the lowest xenon excited states (5p56s) in electron beam (e-beam) pumped XeCl laser mixtures (nonlasing) are performed using pulsed hook interferometry. The e-beam pulse length is ≊0.45 μs (full width at half-maximum) with an average excitation rate of ≊250 kW/cm3. Density differences (ΔN*) of transitions at 823.2 nm (6s[3/2]02 -6p[3/2]2), 828.0 nm (6s[3/2]01 -6p[1/2] 0), and 840.9 nm (6s[3/2]02 -6p[3/2] 1) are obtained for various HCl and Xe concentrations. For a 98.3% Ne/1.5% Xe/0.16% HCl mixture at 3000 Torr, ΔN* (823.2 nm) and ΔN*(828.0 nm) are relatively constant at ≊3×10 14 and ≊1.7×1014 cm-3, respectively. At lower initial HCl concentrations, the ΔN*(823.2 nm) density starts out similar to the 0.16% HCl case, but tends to increase dramatically during the e-beam pulse. For a 0.04% HCl mixture, a ΔN*(840.9 nm) density of ≊4.5×1015 cm -3 is measured at the end of the e-beam pulse. Preliminary comparisons of the data with a computer model show good agreement for HCl concentrations ≥0.16%, but disagreements at leaner concentrations.

Original languageEnglish
Pages (from-to)1986-1988
Number of pages3
JournalApplied Physics Letters
Issue number24
Publication statusPublished - 1987
Externally publishedYes

ASJC Scopus subject areas

  • Physics and Astronomy (miscellaneous)


Dive into the research topics of 'Xenon excited state density measurements in electron beam pumped XeCl laser mixtures'. Together they form a unique fingerprint.

Cite this