A study of physical design guidelines in thruchip inductive coupling channel

Li Chung Hsu, Junichiro Kadomoto, So Hasegawa, Atsutake Kosuge, Yasuhiro Take, Tadahiro Kuroda

    研究成果: Article査読

    4 被引用数 (Scopus)

    抄録

    ThruChip interface (TCI) is an emerging wireless interface in three-dimensional (3-D) integrated circuit (IC) technology. However, the TCI physical design guidelines remain unclear. In this paper, a ThruChip test chip is designed and fabricated for design guidelines exploration. Three inductive coupling interface physical design scenarios, baseline, power mesh, and dummy metal fill, are deployed in the test chip. In the baseline scenario, the test chip measurement results show that thinning chip or enlarging coil dimension can further reduce TCI power. The power mesh scenario shows that the eddy current on power mesh can dramatically reduce magnetic pulse signal and thus possibly cause TCI to fail. A power mesh splitting method is proposed to effectively suppress eddy current impact while minimizing power mesh structure impact. The simulation results show that the proposed method can recover 77% coupling coefficient loss while only introducing additional 0.5% IR-drop. In dummy metal fill case, dummy metal fill enclosed within TCI coils have no impact on TCI transmission and thus are ignorable.

    本文言語English
    ページ(範囲)2584-2591
    ページ数8
    ジャーナルIEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
    E98A
    12
    DOI
    出版ステータスPublished - 2015 12月

    ASJC Scopus subject areas

    • 信号処理
    • コンピュータ グラフィックスおよびコンピュータ支援設計
    • 電子工学および電気工学
    • 応用数学

    フィンガープリント

    「A study of physical design guidelines in thruchip inductive coupling channel」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル