TY - GEN
T1 - Design of a Passively Mode-locked Microlaser with an Er-doped Microcavity and Carbon Nanotubes
AU - Imamura, Riku
AU - Nakashima, Ayata
AU - Nagashima, Keigo
AU - Prugger Suzuki, Tomoki S.L.
AU - Ishida, Rammaru
AU - Fujii, Shun
AU - Tanabe, Takasumi
N1 - Funding Information:
1 T. Kumagai, et al., J. Appl. Phys. 123, 233104 (2018). [2] S. Fujii and T. Tanabe, Nanophoton. 9, 1087 (2020). [3] A. Martinez and S. Yamashita, Opt. Express 19, 6155 (2011). This work was supported by MEXT Quantum Leap Flagship Program (MEXT Q-LEAP) JPMXS0118067246.
Publisher Copyright:
© 2021 IEEE.
PY - 2021/6
Y1 - 2021/6
N2 - Ultrahigh repetition rate lasers will become vital light sources for many technologies; however, they are difficult to realize because the cavity must be miniaturized. A mode-locked laser with whispering-gallery-mode (WGM) microresonators would provide a cost-effective on-chip solution that would allow us to demonstrate ultra-high repetition rate lasers. However, the required parameters, such as the cavity size, dispersion, minimum gain, and amount of saturable absorption (SA) loss, are unknown; we need to establish a clear guideline if we wish to discuss experimental feasibility and achieve mode locking (ML). Here, we report on a numerical investigation that clarified the optimum design parameters to achieve passive ML with a toroidal WGM microlaser.
AB - Ultrahigh repetition rate lasers will become vital light sources for many technologies; however, they are difficult to realize because the cavity must be miniaturized. A mode-locked laser with whispering-gallery-mode (WGM) microresonators would provide a cost-effective on-chip solution that would allow us to demonstrate ultra-high repetition rate lasers. However, the required parameters, such as the cavity size, dispersion, minimum gain, and amount of saturable absorption (SA) loss, are unknown; we need to establish a clear guideline if we wish to discuss experimental feasibility and achieve mode locking (ML). Here, we report on a numerical investigation that clarified the optimum design parameters to achieve passive ML with a toroidal WGM microlaser.
UR - http://www.scopus.com/inward/record.url?scp=85117618725&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85117618725&partnerID=8YFLogxK
U2 - 10.1109/CLEO/Europe-EQEC52157.2021.9542565
DO - 10.1109/CLEO/Europe-EQEC52157.2021.9542565
M3 - Conference contribution
AN - SCOPUS:85117618725
T3 - 2021 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2021
BT - 2021 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2021
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2021 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2021
Y2 - 21 June 2021 through 25 June 2021
ER -