Development of a new cutting fluid supply system for near dry machining process

Motoki Yamashita, Yasuhiro Kakinuma, Tojiro Aoyama, Mitsuho Aoki

研究成果: Article査読


Large amount of cutting oil consumption is one of the issues for environment. The Minimum Quantity Lubrication (MQL) technique has been applied to the near-dry cutting process. However, MQL technique generates oil mist which is harmful to the working environment and the health of factory workers. In this study, a new lubrication system called Direct Oil Shot Lubrication System (DOS) was developed and applied to milling processes. The performances of DOS technique was evaluated by measuring the floating oil mist and carrying out the cutting tests. The amount of floating oil mist of DOS system was considerably reduced compared to the MQL. The behavior of small oil drops supplied from DOS nozzle to cutting edge was analyzed by means of a high speed video observation, and the optimum setting for DOS was obtained. The experimental result shows developed DOS system realized the smaller density of oil mist floating than the MQL technique while the DOS attained the almost same lubrication effect in milling process as the MQL technique.

ジャーナルKey Engineering Materials
出版ステータスPublished - 2009

ASJC Scopus subject areas

  • 材料科学一般
  • 材料力学
  • 機械工学


「Development of a new cutting fluid supply system for near dry machining process」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。