Experimental study on failure mechanism of hybrid composite joints with different adhesives

Jae Il Choi, Seyyed Mohammad Hasheminia, Heoung Jae Chun, Jong Chan Park

研究成果: Article査読

9 被引用数 (Scopus)

抄録

The use of the hybrid joint has increased in recent years because of its superior mechanical characteristics. In this study, quasistatic experiments were performed to elucidate the failure mechanism of hybrid composite joints upon consideration of the properties of the adhesive, clamping force, and joint width. The results showed that the stiffness of the adhesive is the most important design parameter. In this study, two adhesives with different stiffness values were used. In the case of the joints using the adhesive with the lower stiffness modulus, it was observed that the load was transferred readily through the adhesive since it was shared between the bolt and adhesive more efficiently. This phenomenon allowed the hybrid joints that use the low-modulus adhesive to sustain greater loads before failure, as compared to the joints that use the stiffer adhesive.

本文言語English
ページ(範囲)569-574
ページ数6
ジャーナルFibers and Polymers
18
3
DOI
出版ステータスPublished - 2017 3月 1
外部発表はい

ASJC Scopus subject areas

  • 化学一般
  • 化学工学一般
  • ポリマーおよびプラスチック

フィンガープリント

「Experimental study on failure mechanism of hybrid composite joints with different adhesives」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル