Fatigue properties of titanium alloy, stainless steel and aluminum alloy treated with Fine Particle Bombardment

Y. Kameyama, H. Akebono, J. Komotori, M. Shimizu

研究成果: Conference contribution

抄録

Fine Particle Bombardment (FPB) treatment is commercially applied in various industries because of its beneficial effect to improve fatigue properties of metallic materials. The increase of fatigue strength of metals achieved by this process is due to a generation of compressive residual stress on their surfaces. In this study we investigated the effects of the FPB treatment on the fatigue properties of Ti-4.5Al-3V-2Fe-2Mo titanium alloy, Al6061 aluminum alloy and type304 austenitic stainless steel by carrying out rotational bending fatigue tests. In the FPB treated titanium alloy, fatigue strength was higher than that of the untreated one. This was due to the beneficial effects of surface hardening. In the case of the aluminum alloy, little increase of surface hardness and compressive residual stress was induced by the FPB treatment, which resulted in no improvement of the fatigue strength. Despite the higher hardness and compressive residual stress, the increase in fatigue strength of stainless steel was lower than that of the titanium alloy. This was because the surface hardness of the stainless steel was increased by a cyclic loading alone, due to a high work hardening factor. These results imply that the effects of the FPB treatment on the improvement of fatigue properties depend on the work hardening factor of treated materials.

本文言語English
ホスト出版物のタイトル11th International Conference on Fracture 2005, ICF11
ページ6081-6086
ページ数6
出版ステータスPublished - 2005
イベント11th International Conference on Fracture 2005, ICF11 - Turin, Italy
継続期間: 2005 3月 202005 3月 25

出版物シリーズ

名前11th International Conference on Fracture 2005, ICF11
8

Other

Other11th International Conference on Fracture 2005, ICF11
国/地域Italy
CityTurin
Period05/3/2005/3/25

ASJC Scopus subject areas

  • 地盤工学および土木地質学

フィンガープリント

「Fatigue properties of titanium alloy, stainless steel and aluminum alloy treated with Fine Particle Bombardment」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル