High deformation rate and failure characteristics of amorphous polymers and their blends

M. N. Machmud; D. Mochizuki; M. Omiya; H. Inoue; K. Kishimoto

doi:10.1016/j.msea.2006.09.141

High deformation rate and failure characteristics of amorphous polymers and their blends

M. N. Machmud
, D. Mochizuki
, M. Omiya
, H. Inoue
, K. Kishimoto

研究成果: Article › 査読

2 被引用数 (Scopus)

抄録

This paper presents a study on deformation and failure characteristics of polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS) and their blends under a constant impact tensile loading rate. The test results showed that blending PC with weaker ABS produced a tougher PC/ABS blend but it demonstrated higher amplitude of oscillation and immediately fractured after yielding. Scanning electron microscopy on the fracture surface revealed that such behavior might be induced by developing voids because of the weakness of the interface between PC and ABS.

本文言語	English
ページ（範囲）	242-244
ページ数	3
ジャーナル	Materials Science and Engineering A
巻	483-484
号	1-2 C
DOI	https://doi.org/10.1016/j.msea.2006.09.141
出版ステータス	Published - 2008 6月 15
外部発表	はい

ASJC Scopus subject areas

材料科学一般
凝縮系物理学
材料力学
機械工学

文献へのアクセス

10.1016/j.msea.2006.09.141

他のファイルとリンク

引用スタイル

@article{7f7777660d784daa8da1b5011c9cc7b7,

title = "High deformation rate and failure characteristics of amorphous polymers and their blends",

abstract = "This paper presents a study on deformation and failure characteristics of polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS) and their blends under a constant impact tensile loading rate. The test results showed that blending PC with weaker ABS produced a tougher PC/ABS blend but it demonstrated higher amplitude of oscillation and immediately fractured after yielding. Scanning electron microscopy on the fracture surface revealed that such behavior might be induced by developing voids because of the weakness of the interface between PC and ABS.",

keywords = "Amorphous polymers, Blends, Rubber, Tensile impact",

author = "Machmud, \{M. N.\} and D. Mochizuki and M. Omiya and H. Inoue and K. Kishimoto",

year = "2008",

month = jun,

day = "15",

doi = "10.1016/j.msea.2006.09.141",

language = "English",

volume = "483-484",

pages = "242--244",

journal = "Materials Science and Engineering A",

issn = "0921-5093",

publisher = "Elsevier Ltd",

number = "1-2 C",

}

TY - JOUR

T1 - High deformation rate and failure characteristics of amorphous polymers and their blends

AU - Machmud, M. N.

AU - Mochizuki, D.

AU - Omiya, M.

AU - Inoue, H.

AU - Kishimoto, K.

PY - 2008/6/15

Y1 - 2008/6/15

N2 - This paper presents a study on deformation and failure characteristics of polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS) and their blends under a constant impact tensile loading rate. The test results showed that blending PC with weaker ABS produced a tougher PC/ABS blend but it demonstrated higher amplitude of oscillation and immediately fractured after yielding. Scanning electron microscopy on the fracture surface revealed that such behavior might be induced by developing voids because of the weakness of the interface between PC and ABS.

AB - This paper presents a study on deformation and failure characteristics of polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS) and their blends under a constant impact tensile loading rate. The test results showed that blending PC with weaker ABS produced a tougher PC/ABS blend but it demonstrated higher amplitude of oscillation and immediately fractured after yielding. Scanning electron microscopy on the fracture surface revealed that such behavior might be induced by developing voids because of the weakness of the interface between PC and ABS.

KW - Amorphous polymers

KW - Blends

KW - Rubber

KW - Tensile impact

UR - https://www.scopus.com/pages/publications/41849087366

UR - https://www.scopus.com/pages/publications/41849087366#tab=citedBy

U2 - 10.1016/j.msea.2006.09.141

DO - 10.1016/j.msea.2006.09.141

M3 - Article

AN - SCOPUS:41849087366

SN - 0921-5093

VL - 483-484

SP - 242

EP - 244

JO - Materials Science and Engineering A

JF - Materials Science and Engineering A

IS - 1-2 C

ER -

High deformation rate and failure characteristics of amorphous polymers and their blends

抄録

ASJC Scopus subject areas

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル