メインナビゲーションにスキップ 検索にスキップ メインコンテンツにスキップ

Improvement of the physical properties of poly(methyl methacrylate) by copolymerization with pentafluorophenyl methacrylate

  • Akihiro Tagaya
  • , Tomoaki Harada
  • , Koutarou Koike
  • , Yasuhiro Koike
  • , Yoshiyuki Okamoto
  • , Hongxiang Teng
  • , Liang Yang

研究成果: Article査読

抄録

Copolymers of methyl methacrylate (MMA) and pentafluorophenyl methacrylate (PFPMA) of various compositions were prepared with a free-radical initiator. When PFPMA was included in the copolymers, the glass-transition temperatures increased and showed a positive deviation from the Gordon-Taylor equation. A copolymer containing 20 wt % PFPMA exhibited almost zero orientational birefringence, and the photoelastic birefringence became zero when the copolymer contained 13 wt % PFPMA. When 20 wt % PFPMA was incorporated into the MMA copolymer, its water absorption decreased to0.4 wt % versus 1.8 wt % for poly(methyl methacrylate) (PMMA) under the same condition. The flammability of the PFPMA/MMA copolymer was reduced in comparison with that of the MMA homopolymer. The refractive indices of the PFPMA/MMA copolymers were very close to that of PMMA, and the transmittances of the copolymers were slightly better than that of PMMA.

本文言語English
ページ(範囲)4219-4224
ページ数6
ジャーナルJournal of Applied Polymer Science
106
6
DOI
出版ステータスPublished - 2007 12月 15

ASJC Scopus subject areas

  • 化学一般
  • 表面、皮膜および薄膜
  • ポリマーおよびプラスチック
  • 材料化学

フィンガープリント

「Improvement of the physical properties of poly(methyl methacrylate) by copolymerization with pentafluorophenyl methacrylate」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル