Non-photolithographic manufacturing processes for micro-channels functioned by micro-contact-printed SAMs

Saigusa Hiroki, Suga Yasuo, Miki Norihisa

研究成果: Article査読


In this paper we propose non-photolithographic fabrication processes of micro-fluid channels with patterned SAMs (Self-Assembled-Monolayers). SAMs with a thiol group are micro-contact printed on a patterned Au/Ti layer, which is vapor-deposited through a shadow mask. Ti is an adhesion layer. Subsequently, the micro-channels are formed by bonding surface-activated PDMS onto the silicon substrate via a silanol group, producing a SAMs-functioned bottom wall of the micro-channel. No photolithographic processes are necessary and thus, the proposed processes are very simple, quick and low cost The micro-reactors can have various functions associated with the micro-contact-printed SAMs. We demonstrate successful manufacturing of micro-reactors with two types of SAMs. The micro-reactor with patterned AUT (11-amino-1-undecanethiol) successfully trapped nano-particles with a carboxylic acid group, indicating that micro-contact-printed SAMs remain active after the manufacturing processes of the micro-reactor. AUT -functioned micro-channels are applicable to bioassay and to immobilize proteins for DNA arrays. ODT (1-octadecanethiol) makes surfaces hydrophobic with the methyl terminal group. When water was introduced into the micro-reactor with ODT-patterned surfaces, water droplets remained only in the hydrophilic areas where ODT was not patterned. ODT -functioned micro-channels are applicable to fluid handling.

ジャーナルieej transactions on sensors and micromachines
出版ステータスPublished - 2006

ASJC Scopus subject areas

  • 機械工学
  • 電子工学および電気工学


「Non-photolithographic manufacturing processes for micro-channels functioned by micro-contact-printed SAMs」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。