抄録
The authors present the planning of a collision-free path for an industrial robot manipulator. If there are some obstacles in the work space, the manipulator recognizes them and plans the safety trajectory autonomously. The manipulator can monitor the obstacles in the work space by a camera. The image from the camera is processed, and the obstacles are recognized by the computer. The safety path for the manipulator is planned in configuration space. This space is constructed with the joint angles. By introducing the middle goal method proposed, the time for the planning of the path is reduced. The effectiveness of the proposed method is shown by several experiments with two- and three-degree-of-freedom manipulators.
| 本文言語 | English |
|---|---|
| ページ | 1017-1022 |
| ページ数 | 6 |
| 出版ステータス | Published - 1991 |
| イベント | Proceedings of the 1991 International Conference on Industrial Electronics, Control and Instrumentation - IECON '91 - Kobe, Jpn 継続期間: 1991 10月 28 → 1991 11月 1 |
Other
| Other | Proceedings of the 1991 International Conference on Industrial Electronics, Control and Instrumentation - IECON '91 |
|---|---|
| City | Kobe, Jpn |
| Period | 91/10/28 → 91/11/1 |
ASJC Scopus subject areas
- 制御およびシステム工学
- 電子工学および電気工学