メインナビゲーションにスキップ 検索にスキップ メインコンテンツにスキップ

Study on compressive property of aluminum alloy lattice structure additively manufactured by 3d printing technology

  • Naoki Takano
  • , Hideo Takizawa
  • , Kohta Ito
  • , Kento Odaka
  • , Satoru Matsunaga
  • , Shinichi Abe

研究成果: Article › 査読

5   !!Link opens in a new tab 被引用数 (Scopus)

抄録

In order to discuss the quality assurance of additively manufactured lattice structure made by aluminum alloy (AlSi10Mg) using 3D printing technology or selective laser sintering technique, compression test, micro-CT imaging and finite element analysis were carried out. The specimens were manufactured by 2 printing service companies with different expertise, which led to the choice of different process parameters such as the building direction, support structure, powder bed temperature and laser scanning speed. The largely scattered compressive peak loads were in good linear positive correlation with the weight, which is the easiest and convenient index for the quality assurance. On the other hand, the apparent density was almost the same. The reason why the weight of the products was largely scattered was investigated by micro-CT image analysis and finite element analysis. Also by comparison with the CAD data, the influence of manufacturer-dependent process parameters on the strength was discussed.

本文言語English
ページ(範囲)351-357
ページ数7
ジャーナルZairyo/Journal of the Society of Materials Science, Japan
巻68
号4
DOI
出版ステータスPublished - 2019 4月

ASJC Scopus subject areas

  • 材料科学一般
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Study on compressive property of aluminum alloy lattice structure additively manufactured by 3d printing technology」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル