抄録
Single-phase perovskite 0.9Pb(Mg1/3Nb2/3)O3-0.1PbTiO3 (0.9PMN-0.1 PT) from a stoichiometric mixture of starting materials was synthesized by applying a mechanochemical technique to the stage of a precursor. A stoichiometric mixture of PbO, TiO2, Mg(OH)2, and Nb2O5 was milled for 60 min and heated at temperatures as low as 850°C for 4 h to obtain a single phase. The maximum dielectric constant of the samples from the milled mixture increased as the sintering temperature increased, with the remarkable grain growth, and attained 24600 at 1200°C. In contrast, poor densification and coexistence of the pyrochlore phase were observed on the samples from the nonmilled mixture. Further observation suggested that the pyrochlore phase concentrated near the surface during sintering and then migrated into the PbZrO3 packing powder, leading to a pyrochlore-free phase at 1250°C. The dielectric constant of the latter ceramics was explained by the series mixing rule for the dielectric constant of a diphasic solid.
| 本文言語 | English |
|---|---|
| ページ(範囲) | 973-981 |
| ページ数 | 9 |
| ジャーナル | Journal of the American Ceramic Society |
| 巻 | 80 |
| 号 | 4 |
| DOI | |
| 出版ステータス | Published - 1997 4月 |
ASJC Scopus subject areas
- セラミックおよび複合材料
- 材料化学
フィンガープリント
「Synthesis of pyrochlore-free 0.9Pb(Mg1/3Nb2/3)O3-0.1PbTiO3 ceramics via a soft mechanochemical route」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。引用スタイル
- APA
- Standard
- Harvard
- Vancouver
- Author
- BIBTEX
- RIS