メインナビゲーションにスキップ 検索にスキップ メインコンテンツにスキップ

Use of Guide Electrode for Increasing Thrust and Thrust-to-Power Ratio in Electroaerodynamic Propulsion Systems

  • Ryotaro Nonaka
  • , Hiroaki Katagiri
  • , Shigeki Yashita
  • , Tomoya Kitamura
  • , Hiroyuki Tsubata
  • , Takahiro Nozaki

研究成果: Article › 査読

抄録

Electroaerodynamic propulsion systems, which use ionic wind resulting from corona discharge to generate thrust, have the advantages of being compact, lightweight, and silent. However, a critical challenge in improving thrust is that increasing the distance between the electrodes to increase the applied voltage increases the leakage of ions, which does not contribute to thrust, resulting in a reduced output thrust. To address this problem, this study proposes a method that uses a cylindrical Guide electrode placed at the same potential above the emitter to generate ions. As a result, this electrode changes the electric field distribution around the emitter and concentrates the electric field toward the collector, thereby suppressing ion leakage. Experimental results show that the addition of the Guide electrode significantly improves the maximum achievable thrust and thrust-to-power ratio, with a maximum thrust improvement of 36.6%. This study demonstrates a relatively more simple and effective electrode design for increasing the generated electroaerodynamic thrust and provides useful knowledge for the design of future high-efficiency and silent propulsion systems.

本文言語English
ページ(範囲)675-682
ページ数8
ジャーナルIEEJ Journal of Industry Applications
巻15
号4
DOI
出版ステータスPublished - 2026

ASJC Scopus subject areas

  • 自動車工学
  • エネルギー工学および電力技術
  • 機械工学
  • 産業および生産工学
  • 電子工学および電気工学

フィンガープリント

「Use of Guide Electrode for Increasing Thrust and Thrust-to-Power Ratio in Electroaerodynamic Propulsion Systems」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル