Virtual motor control for the machine tool table with three linear servo motors

Keisuke Umezawa; Yasuhiro Kakinuma; Seiichiro Katsura; Kohei Ohnishi; Tojiro Aoyama; Katsuhiko Yokoi

Virtual motor control for the machine tool table with three linear servo motors

Keisuke Umezawa, Yasuhiro Kakinuma, Seiichiro Katsura, Kohei Ohnishi, Tojiro Aoyama, Katsuhiko Yokoi

研究成果: Paper › 査読

抄録

The linear motor driving mechanism has been adopted as a positioning mechanism of machine tools to realize high speed and precise positioning due to the absence of friction and backlash. However, when two or more linear motors are used, minute differences between the thrust forces of each motor causes the generation of micro vibration and the change of velocity of each linear motor due to yawing around the center of gravity. This study proposes a virtual motor control method that uses three linear motors for the driving table to control the position of the center of gravity, bending and yawing independently.

本文言語	English
出版ステータス	Published - 2007
イベント	4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007 - Fukuoka, Japan 継続期間: 2007 11月 7 → 2007 11月 9

Other

Other	4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007
国/地域	Japan
City	Fukuoka
Period	07/11/7 → 07/11/9

ASJC Scopus subject areas

産業および生産工学

他のファイルとリンク

引用スタイル

@conference{37a3a60b6161430aaa3c12664f1a216c,

title = "Virtual motor control for the machine tool table with three linear servo motors",

abstract = "The linear motor driving mechanism has been adopted as a positioning mechanism of machine tools to realize high speed and precise positioning due to the absence of friction and backlash. However, when two or more linear motors are used, minute differences between the thrust forces of each motor causes the generation of micro vibration and the change of velocity of each linear motor due to yawing around the center of gravity. This study proposes a virtual motor control method that uses three linear motors for the driving table to control the position of the center of gravity, bending and yawing independently.",

keywords = "Disturbance observer, Feedback control, Feedforward control, Machine tools, Motion control",

author = "Keisuke Umezawa and Yasuhiro Kakinuma and Seiichiro Katsura and Kohei Ohnishi and Tojiro Aoyama and Katsuhiko Yokoi",

year = "2007",

language = "English",

note = "4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007 ; Conference date: 07-11-2007 Through 09-11-2007",

}

TY - CONF

T1 - Virtual motor control for the machine tool table with three linear servo motors

AU - Umezawa, Keisuke

AU - Kakinuma, Yasuhiro

AU - Katsura, Seiichiro

AU - Ohnishi, Kohei

AU - Aoyama, Tojiro

AU - Yokoi, Katsuhiko

PY - 2007

Y1 - 2007

N2 - The linear motor driving mechanism has been adopted as a positioning mechanism of machine tools to realize high speed and precise positioning due to the absence of friction and backlash. However, when two or more linear motors are used, minute differences between the thrust forces of each motor causes the generation of micro vibration and the change of velocity of each linear motor due to yawing around the center of gravity. This study proposes a virtual motor control method that uses three linear motors for the driving table to control the position of the center of gravity, bending and yawing independently.

AB - The linear motor driving mechanism has been adopted as a positioning mechanism of machine tools to realize high speed and precise positioning due to the absence of friction and backlash. However, when two or more linear motors are used, minute differences between the thrust forces of each motor causes the generation of micro vibration and the change of velocity of each linear motor due to yawing around the center of gravity. This study proposes a virtual motor control method that uses three linear motors for the driving table to control the position of the center of gravity, bending and yawing independently.

KW - Disturbance observer

KW - Feedback control

KW - Feedforward control

KW - Machine tools

KW - Motion control

UR - http://www.scopus.com/inward/record.url?scp=84883387067&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84883387067&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84883387067

T2 - 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007

Y2 - 7 November 2007 through 9 November 2007

ER -

Virtual motor control for the machine tool table with three linear servo motors

抄録

Other

ASJC Scopus subject areas

他のファイルとリンク

フィンガープリント

引用スタイル